You can clean your bathtub by following the simple steps.
- First of all, you have to remove the things from the bathtub and clean the dust.
- Now you can apply the cleaner to the tub and scrub all the surfaces.
- The next step is to clean the tub using water before moving to the toilet and vanity area.
- You need to scrub all the hidden places and at the end, clean the floor as well.
Let us discuss the details of these steps:
1. Eliminate All Things from Their Typical Spots
For best outcomes, do this for the entire bathroom before you start the cleaning process. Eliminate the entirety of your items from the shower as well as a bathtub.
Throw every single utilized towel and floor coverings outside the bathroom. Move any things from the counters outside the bathroom too. Remember to get garbage bins.
2. Dust and Clear
To clean off dust, snatch your duster with a long handle to eliminate any spider webs in corners, on light installations, or in the vents.
In the event that you actually can’t arrive at the spider webs, pull in a stepladder to get up high. When done, clean or vacuum the floors to get hair and other debris and that may have gathered on the floors.
3. Apply Cleaner to Shower and Bathtub
Apply a good branded cleaner. In the event that you clean consistently, you do not need a strong cleaner; otherwise, you need to have a strong cleaner. Remember the shower and inside the shower door if relevant. Allow it to soak well before you move to the next step.
4. Scrub Hidden and Difficult Spots
Rinse the branded or a well-known cleaner onto your cleaning gadget (for example, microfiber material, wipe, and so on) and wipe down any towel racks, doors, blinds, and windowsills. Work in segments from the highest point of the bottom and left to right.
5. Put Cleaning Solution to The Floor
Fill a bucket with warm water and the suggested measure of the bathroom cleaner. Now you can put the solution on the floor.
Also Read: How to Caulk a Bathtub?
6. Hit the Shower and Bathtub
Now, the cleaner will have done a significant part of the work for you, permitting you to scrub away dirt and development delicately. Wipe all the walls, doors, floors, and different surfaces clean before you use any water to flush.
7. Finish the Shower and Bathtub
Once you rinse the shower and bathtub with water, you can put back everything you eliminated earlier. Clean them as well as you go. Close the shower window and door.
8. Clean the Vanity Region
Splash the cleaner on the sink, plugs, and shelves. Now you can wipe it with a clean cloth or sponge. In the event that you have dirt and stain development in the sink or a cleaner dish, utilize a scrubby wipe to clean it off. Utilize the glass cleaner on your mirror.
9. Clean the Latrine
On the off chance that you scrub inside your latrine routinely, the cleaner can take care of business. Shower or sprinkle a latrine cleaner on the off chance that development exists, scrub with a latrine brush prior to flushing. Splash the outside of the restroom with the cleaner, and now you can wipe with a clean cloth or brush.
10. Mop the Floor
Lower your mop into the container of the cleaning bucket. Use a lot of water to clean the bathroom floor. When dry, you can replace the garbage bin and your newly washed floor coverings.
The above steps can help you clean your bathroom quickly and proficiently, as can keeping it clean between detailed cleanings.
Also Read: How to Remove Bathtub Drain?
Materials Used to Create A Bathtub
Contingent upon the material that is utilized to make the bathtub, various strategies for cleaning can affect the bathtub. Few of the materials are simpler to clean when contrasted with others, while some may require longer and more energy as well. We should have a brief glance at a couple of materials that are normally used to make bathtubs.
Porcelain Enameled Steel Bathtub
Porcelain plated steel is a usually utilized and less costly choice with regards to making bathtubs. These bathtubs will, in general, be heavier than acrylic and fiberglass bathtubs. They are amazingly solid and are not difficult to clean.
A disadvantage of utilizing porcelain plated steel bathtubs is that they will, in general, get chipped easily and these chipped territories can rapidly start to rust.
When cleaning a porcelain bathtub, try not to utilize harsh cleaners as they can chip the outside of the bathtub. Likewise, avoid scouring powder, white vinegar, and steel fleece as they can harm the bathtub’s surface. It would be best if you searched for a cleaner that is delicate on a porcelain-enameled steel bathtub.
You can even make your porcelain bathtub cleaner at your home by following the beneath steps:
Several tablespoons of your dishwashing cleanser to a gallon of boiling water and apply on the outside of the bathtub utilizing a wipe or a cloth. Scrub the porcelain and wash it well with water.
Ensure you utilize this process once every month – probably – as it can harm the bathtub with overuse. On the off chance that you wish to give your bathtub a brand new and sparkly appearance, use a modest quantity of lemon oil and rub the sides of the bathtub.
Also Read: How Hot are Hot Tubs?
Acrylic bathtubs are frequently utilized today because of their adaptability, toughness, available options, and cost-effectiveness. The acrylic tub comprises vacuum framed acrylic sheets, which are then built up with the assistance of fiberglass. They have a non-permeable surface and can be fixed fairly on account of any harm. They come in a scope of design, shapes, and sizes.
Yet, care has to be taken while cleaning such bathtubs as they will, in general, get scratched when cleaned with a rough cleaner.
It is critical to be cautious when cleaning your bathtub in the event that it is comprised of acrylic plastic. Acrylic plastic can be easily harmed by the impacts of synthetic and rough materials. It is prescribed to take even more consideration while cleaning an acrylic plastic bathtub. Here is the thing that you can do:
Utilize warm water and wet the bathtub before you start the cleaning process. Pour a modest quantity of cleanser on a soggy cloth or a piece of fabric and focus on the outside of the bathtub circles. Flush the cloth regularly as the cloth can collect cleanser on it.
Flush the outside of the bathtub and repeat the process until you can see that the bathtub is clean and spot-free. After the surface has dried and is cleaned, utilize a jar of vehicle wax and a cloth to apply the wax on the outside of the bathtub.
Apply the wax on the outside of the bathtub in circles, similar to how you would apply wax on your car.
Permit the surface to dry out for a couple of moments and buff the outside of the bathtub with the assistance of a dry cotton ball. The car wax applied to the bathtub provides the final finish and the cleanser doesn’t adhere to the surface. Repeat the process if you want.
Fiberglass bathtubs are also a cost-effective choice concerning bathtubs. They are made with layers of surface coat, polyester tar, and fiberglass fortifications. They are less strong too.
When you are cleaning your fiberglass bathtub, you should take care as they are not sturdy like different materials, and the surface can get broken and scratched without much of a stretch. The finishing likewise will, in general, disappear with consistent use.
You can clean your fiberglass bathtub with the assistance of a shower or cleaner blend as clarified in the below:
In a piece of high temp water, blend a sound measure of bathtub cleaner and a large portion of your dish cleanser. At the point when the solutions are blended, it will start to shape a glue. Continue adding this mixture to the bathtub.
Utilize a wipe and apply the combination on the bathtub and allow it to sit for 30 minutes or more. After thirty minutes, you can scrub the bathtub.
Flush the fiberglass bathtub with the assistance of cold water and wipe away a lot of water with the assistance of a paper towel. Now you can utilize a cloth to wipe away every one of the stains and marks.
To give your fiberglass bathtub the sparkle of a new bathtub, utilize a scrubbing wax made particularly for fiberglass. Here is the thing that you need to do:
Take the car wax and a buffer. Now you can apply the scouring wax in little segments. Try not to apply the blend for long on one territory as it can consume the fiberglass.
Now you can buff the scouring wax with the assistance of terry fabric and complete the process with car wax. Wash with cold water and let it dry.
Also Read: How to Fix A Leaky Bathtub Faucet?
Plated Cast Iron Bathtub
Plated cast iron bathtub is an amazingly strong and substantial bathtub, which is comprised of plated cast iron. It is comprised of casted iron and is covered with a finish. It is costlier when contrasted with different sorts of bathtubs; however, this makes them even more tough and durable.
The thick finish cover makes it impervious to chipping and scratching and assists you with keeping up the bathtub for quite a long time to come. In any case, try not to utilize synthetics on a plated cast iron bathtub and utilize delicate cleaners and water to keep it new for quite a long time to come.
Handle a plated cast iron with alert as you can wind up staining it with the utilization of destructive synthetics. For everyday cleaning, it is prescribed to utilize baking soda with warm water. All you need to do is:
Make a glue-like mixture out of heading soda and warm water and apply it to the stains. Now you have to allow the glue to stay there for around 30 minutes. Next, you have to utilize a cleaning towel to scrub the scrum and filth. Wash with warm water.
Be that as it may, if your bathtub has some extreme stains, follow the accompanying steps:
Blend a teaspoon of trisodium phosphate cleaner (TSP) with heated water. Apply the blend on the stain with delicate scouring utilizing a wipe and wash well.
Bathtubs Made of Cast Polymers
These are uncommon designed stone or strong surface materials shaped along with minerals, polymeric materials, and tars to frame a strong surface, and are typically polished off with a gel cast finish.
A good consideration has to be taken while cleaning cast polymer bathtubs as even the smallest scratches can obliterate the sparkle of the bathtub. It is in this manner prescribed to try not to utilize grating scrubs and synthetic compounds on it.
It is critical to receive use proper steps while cleaning a cast polymer as even the smallest scratches would be effectively noticeable. It is strongly prescribed to try not to utilize grating cleaners and scratchy wipes. Follow the accompanying steps to remain safe:
Utilize a gentle cleanser or a gentle cleanser for cleaning. To eliminate cleanser scrums, blend vinegar and water in equivalent sums and splash on the influenced territory. Now you can wipe the territory with a delicate material.
Also Read: Why Do Divers Use Hot Tub?
Things to Avoid When Cleaning Your Bathtub
By staying away from these normal and senseless missteps and mistakes that individuals regularly make, you can ensure that your bathtub sparkles and continues to sparkle for the longest time you can imagine.
- Try not to leave your cleanser or cleanser bottles on the bathroom or bathtub floor, as this can make more stains. The acids in these items make the bathtub easy to break and for the microbes to develop.
- Never utilize any rough scrubbers, hard devices, or steel fleece to rub or scrub the outside of the bathtub. This can make the bathtub weak and break and begin showing imprints and scratches.
- Avoid items that are excessively hard for the bathtub. Avoid acetones as they have a similar impact to a grating scrub sponge or steel fleece on the bathtub.
- Try not to work with synthetic substances with no type of ventilation. The ventilation can be as a window or an exhaust fan. Working in encased circumstances with these synthetic compounds can cause fumes that can be harmful to the user’s lungs and skin.
- Try not to have every one of your expectations on one item. Utilize the items that are generally appropriate for space and work.
- It is critical to allow the sanitizer to sit on the outside of the bathtub for in any case 5 minutes.
- Don’t simply clean the dirty territory. Large numbers of us imagine that it is sufficient to clean the soil and stain from the obvious areas or in the spaces that have the stain. Nothing could be further from reality. Clean the entire bathtub and bathroom for a clean and without germ climate. Clean the sides, cover up territories inside the construction, and all-around to ensure that your bathtub is cleaned from any stains and microscopic organisms.
- Trim your shower drape to coordinate with your bathtub. When the shower liner hits the bathtub, the territory is excessively wide and can go about as a simple favorable place for germs buildup.
Also Read: How to Unclog Bathtub?
At last, keeping your bathtub clean requires persistence and order. Once you bathe, or as frequently as could be expected, attempt to flush the tub surface with clean, warm water before clearing off the excess humidity with a wiper, microfiber fabric, or wipe. Doing makes it hard for stains to develop and easier for you to clean your bathtub when needed.
I grew up on a small farm in New Jersey. We had a big family because my parents, my uncles, and aunties all were living together on this farm so, you can imagine, it was always overcrowded with people. We built our first home from scratch (of course I and my husband both have a degree in interior designing from Syracuse University) but still, I know so many of our classmates wouldn’t bother doing it themselves and rather delegate it to some agency or person but we both are crazy about our passion. Read Full Story